Tel: +44 (0)1959 563400
Fax: +44 (0)1959 562563
E-mail: info@vanitec.org

Vanitec Limited, Winterton House, High Street, Westerham, Kent TN16 1AQ, England
Reg No. 06490949

Application Technologies of Vanadium in Flat-rolled Steels – Proceedings of the Vanitec Symposium, Suzhou, China, Oct. 2005. (V1005)

The Use of Vanadium in Flat Rolled Products
P. S. Mitchell

Microalloying with Vanadium for Improved Cold Rolled TRIP Steels
C. Scott, F. Perrard, P. Barges

Development and Production of HSLA 80 ksi (550MPa) Steels at Gallatin Steel
L. K. Chiang

Vanadium in Cold-rolled Sheet Steels
John Speer

A Review of Vanadium Microalloying in Hot Rolled Steel Sheet Products
Robert J. Glodowski

Extended Use of Vanadium in a New Generation of Flat Rolled Steels
Stanislaw Zajac

Study on High Tensile Heavy Plate with V-N Microalloying Technology
Yang Xiong，Jin Yongchun，Wang Quanli，Zhang Gongyan

Hot Deformation Behavior and Recrystallization Controlled Rolling of Ti-V-N Plate Steels
Sun Quanshe, Zhang Yongjia

Cause and Measures of Transverse Corner Crack in Hull Structural V-containing Steel CC Slab
Ma Qingshen, Jiang Zhonghang, Xu Li, Luo Wenbin,Yang Xiaoshan, Liu Yan

Effect of Vanadium on the Microstructure and Properties of Fire-resistant Weathering Steels
Zheng Zhiwang, Liu Qingchun

Application of VN in 400MPa Cu-P-Cr-Ni Weather and Erosion Resistant Steels
Li Jun

Effect of Vanadium on the Microstructure and Properties of Fire-resistant Steels
Zheng Zhiwang, Liu Qingchun

Analysis on Vanadium's Impact on Metallographic Transitions of HSLA Steel
Liu Yong，Zhang Zhongping，She Guangfu，Zhou Liquan，Yu Wanhua，Han Jingtao

International Seminar on Production and Application of HIgh Strength Seismic Grade Rebar Containing Vanadium , Beijing, China, June 2010

Review of Applications of Vanadium in Steels
Gan Yong，Dong Han, （China Iron & Steel Research Institute Group）

The Japanese Experience in Design and Application of Seismic Grade Rebar
Masakatsu Miyajima, (Kanazawa University, Japan)

Optimization and Selection of Reinforced Steel Bar Applicable in the Code for Concrete Structures of P. R. China
Xu Youlin, (China Academy of Building Research)

Metallurgical Benefits of Vanadium Microalloying in Producing High Strength Seismic Grade Rebar
David Milbourn，Li Yu , (Vanitec Limited)

Comparative Investigation of Seismic Resistant Behaviors between Vanadium Micro-Alloyed and Post-Rolling Tempcored Rebars
Sheng Guangmin, Lv Yukun, Zhan Suyu, Yu Mengshan, (Chongqing University)

Development of High Strength Construction Rebars
Yang Caifu, (Central Iron & Steel Research Institute)

Review of Quality and Production of Seismic Rebars in China
Zhu Jianguo，Chen Jie, （The State Quality Supervision and Inspection Center for Building Steels）

Interpretation and Characterization of Seismic Performance of Rebars in Domestic and International Standards
Wang Limin, (China Metallurgical Information and Standardization Institute)

The Importance of Steel Reinforcing Materials in the Seismic Performance of Reinforced Concrete Structures - An Overview of Modern Australian & New Zealand Experience
Philip Sanders (Building Knowledge Pty Ltd, Sydney, Australia.)

Research and Application of High-Strength Reinforcing Bar – Proceedings of the Vanitec Symposium, Hangzhou, China, Oct. 2003. (V1003)

Some Recent Results of the Research on Steel Rebars
A. Franchi and P. Crespi

Development and Production of Advanced Reinforcing Steel
D. Russwurm

European Standards for Reinforced Concrete
U. Litzner

Reinforcing Technique with BSt500 - The Networking of All Parties to Reduce Costs and Improve Quality
D. Jungwirth

Productions and Applications of 400MPa Hot Rolled Ribbed Bars
Y. Xu

Devoting Major Efforts to Application & Dissemination of 400 MPa III Grade Rebar
S. Xie

The Affects of the Bar Ductility on the Failure Morphology and Safety of the Structures
Y. Xu, Z. Cheng and X. Wang

Study on the Effect of Reinforcement on the Earthquake - Resistance of Xiaowan Arch Dam
H. Chen, Y. Guo and J. Tu

Popularization and Application of HRB400MPa(20MnSiV) Hot - Rolled Rebars in Hunan Province
C. Xu and Z. Wang

Experimental Research on Mechanical Properties of Corroded Steel Bars
Y. Xu, Z. Cheng, X. Wang, L. Liu, P. Guan and S. Yang

Application of Grade III Reinforced Steel in the Shearing Wall Frame Structure of Jinjiang Garden Project
J. Lin and Y. Tang

The Commercial Trial - Production of HRB400 Reinforced Bar with V - N Microalloying
S. Su, W. Wan, R. Zhang, M. Zhao and Y. Wang

Application of Electroslag Welding in HRB400 Reinforced Bar
C. Xu, Y. Chen and Y. Liu

Research and Development of High - Strength Ribbed Bars in Chehgde Steel
X. Huang and X. Meng

Development of 500 MPa High Strength Steel Bar
D. Gong, K. Zhang and J. Yan

Research, Production and Application of High Strength Rebars
C. Yang

Research and Production of High Strength Hot Rolled Ribbed Steel Bar BS G460
W. Wan, X. Yu and R. Zhang

Trial - Production of HRB400 Hot Rolled Ribbed Bar Ø6.0 mm,
J. Kong, B. Zhao, Z. Wang, Y. Zheng, S. Zhang and G. Zhao

Research and Development on HRB400 Reinforced Bars in Handan Steel
L. Sun, F. Wang, M. Li and L. Yang

Report on the Trial Production of HRB500 Reinforced Bars in Chengde Steel
Z. Bai

Research and Development of HRB400 Hot - Rolled Ribbed Bar
J. Yan, Y. Li and X. Liang

Research on the Test of Properties of Aseismatic Reinforced Bars Produced by Chengde Steel
Y. Zhang, S. Gong and G. Sheng

Market Development of HRB400 Grade III Rebar
Z. An

The Use of Vanadium in Steel - Proceedings of the Vanitec Symposium, Beijing, China, Oct. 2001. (V0502)

The Use of Vanadium
P. S. Mitchell

A New Role for Microalloyed Steels Adding Economic Value
M. Korchynsky

Development and Use of Vanadium in Micro-Alloyed Reinforcing Bar
V. Russwurm

Vanadium Microalloyed Forging Steels
G. Krauss

Precipitation and Grain Refinement in Vanadium-Containing Steels
S. Zajac

The Evolution of Microstructure During Thin Slab Direct Rolling Processing in Vanadium Microalloyed Steels
Y. Li, D. N. Crowther, P. S. Mitchell and T. N. Baker

The Effects of Microalloying Elements on Cracking During Continuous Casting
D. N. Crowther

The Influence of Vanadium-Microalloying on the Weldability of Steels
P. H. M. Hart

Vanadium Microalloying in Steel Sheet, Strip and Plate Products
Robert J. Glodowski

The Use of Vanadium in Steel - Proceedings of the Vanitec Symposium, Guilin, China, Nov., 2000. (V0101)

The Production and Use of Vanadium Worldwide
P. S. Mitchell

Development of China Vanadium Industry
Zhou Jiacong

Overview of Microalloying in Steel
W. B. Morriso

Proposals for the Optimization of Steel Bars in Construction
Xu Youlin

Use of Vanadium in Flat Products (Plate and Strip)
M. Korchynsky

Development and Application of V, Ti and Nb Microalloyed Steel in Anshan Iron & Steel Group Co.
Lin Ziquan, Ao Liege, Hao Sen

Vanadium in Medium and High Carbon Steels
R. J. Glodowski

Research on New HSLA Steel- WDL Steel with Low Susceptibility to Weld Crack
Chen Xiao

The Manufacture and Properties of As-Rolled V -Containing Structural Steels
R. Lagneborg

Research and Production of V -Cu-Ni Series High Strength Steel for Pressure Vessel
Zhang Yongjia

The Weldability of Vanadium Microalloyed Steels
P. H. M. Hart

New Grade III Rebar Steelmaking by Converter with Direct Alloying of Vanadium Pellet-Study of 20MnSiV Production Experiment
Liang Xinwei, Liu Wei

A Comparison of the Effects of Microalloying on Cracking During Continuous Cracking
D. N. Crowther

Effect of VN Alloying on the Structure of 20MnSiV Concrete Steel
Tang Daiming, Zhang Chunlan, Xu Benping, Gong Deping, Tang ling

Research and Application on Medium-Carbon Microalloyed High Strength Steel
Shougang Corporation

Study on Application of VN Microalloyed Steel
Xia Maosen, Sun Weihua, Qin Xiahai

Summary on 20MnSiV Production Test
Zhang Xinjian

Application of PC in the Processing of V2O5 Production Data
Zhang Qunzhan, Liu Weizhong

Application of VN Alloy in 400MPa Reinforcing Bar
Gong Deping, He Mingxing, Luo Kaijin

Vanadium in Rail Steels - Proceedings of Vanitec Seminar in Chicago, 8th Nov. 1979. (V120)

A chromium-vanadium alloyed railsteel for heavy duty requirements
H. Schmedders

The manufacture and railroad trials with chromium-vanadium steel for heavy duty service, e
A. M. Sage, W. Hodgson, D. H. Ston

Development of improved railand wheel materials
S. Marich

Fast-welding chromium-molybdenum-vanadium extra-high strength railsteels
F. B. Fletcher, Y. E. Smith and V. A. Biss

Development of a low carbon vanadium-copper-chromium rail steel of improved weldability for curves and points in European railways
J. Dilewijns, L. Schetky, A. M. Sage

Thermit welding of chromium-vanadium railsteel
H. D. Fricke

Vanadium Structural Steels - Reprint of papers on vanadium steel from the proceedings of “ASM HSLA Steels Technology and Applications Conference, Philadelphia, USA, Oct., 1984. (V0485)

Recent Innovations in Alloy Design and Processing of Microalloyed Steels
W. Roberts

Prediction of Microstructure Development During Recrystallization Hot Rolling of Ti-V Steels
W. Roberts, A. Sandberg, T. Siwecki.

Achieving Grain Refinement Through Recrystallization Controlled Rolling and Controlled Cooling in V-Ti-N Microalloyed Steels
Y-Z. Zheng, A. J. DeArdo. R. M. Fix. G. Fitzsimons

Processing Characteristics and Properties of Ti-V-N Steels
T. Siwecki. A. Sandberg, W. Roberts.

The Effects of Accelerated Processing on the Microstructure and Mechanical Properties of V- and V+ Cb HSLA Steels
D. M. Fegredo, J. D. Boyd.

Microstructures and Properties of Controlled Rolled and Accelerated Cooled Molybdenum-Containing Line Pipe Steels
A. P. Coldren, T. G. Oakwood.

HSLA Steel with High Weldability and Improved Characterizations Obtained Through Vacuum Heated Ladle Refining Technique
R. Blondeau, G. Pressouvre, J. Maniere, L. Cadiou.

Formable Hot-Rolled Steel with Increased Strength
T. Nilsson. Svenskt Stal Aktiebolag. Domnarvet. Borlange.

Restricted Yield Strength Variation in High Strength Low Alloy Steels,
E. G. Hamburg

Continuously Annealed Cold-Rolled Microalloyed Steels with Different Microstructures
R. Pradhan

Effect of Cold Forming on the Strain-Controlled F`atigue Properties of HSLA Steel Sheets
J. M. Holt

A Study of Deformation Characteristics of Mn-V Dual Phase Steel
M. Mingtu, W. Degen, W. Baorong

A new HSLA Steel for an Automotive Steering Coupling Component
D. D. Rogers, D. A. Wilkinson

Properties of Low-Carbon As-Rolled Steel Bars for Machine and Structural Use
H. Ohtani, F. Nakasato

Microalloyed Bar for Machine Structural Use
T. Sampei, T. Abe, H. Osuzu, I. Kozasu

Development of Microalloyed Medium Carbon Hot Rolled Bar Products
J. F. Held, B. A. Lauer

Mechanical Properties and Machinability of a High Strength Medium Carbon, Microalloyed Steel
V. Ollilainen, H. Hurmola, H. Pontinen

Concrete and Tube Steels Microalloyed by Vanadium and Nitrogen
R. Halbrstatova, T. Prnka, v. Smid, V. Navrat

Precipitation Strengthened Spring Steel for Automotive Suspensions
T. Yamamoto, R. Kobahashi

Microalloyed Pearlitic Steels for the Wire Industry --Mechanisms of Alloy Element Redistribution and Strengthening Processes in Chromium-Vanadium Eutectoid Steels
T. D. Mottishaw, G. D. W. Smith

Microalloying and Precipitation in Cr-V Rail Steels
D. E. Parsons, T. F. Malis, J. D. Boyd

The Structure and Toughness of the Weld Heat-Affected Zone of a C-Mn-V Steel
J. T. Bowker, A. G. Glover,:R. B. Lazor.

Mechanical Properties and Physical Metallurgy of HSLA Steel Laser Beam Weldments
P. E. Denney, E. A. Metzbower